Activity
From 05.05.2025 to 03.06.2025
02.06.2025
- 10:52 RF PLC User story #2592: Define communications between PLC and EPICS avoiding the use of the microbox
- Network architecture updated: (pre-drivers removed)
- 10:33 RF PLC User story #2592: Define communications between PLC and EPICS avoiding the use of the microbox
- Agreed to remove modbus TCP connection from drivers. Their status will be monitored by signals directly connected to PLC
- 10:46 RF PLC User story #2594: Frist draft of State Machine to be implemented inPLC
- first draft of new state machine finished. Iago would like to review the old and new state machine and later to revie...
- 10:29 RF PLC User story #2651 (Closed): Use port CP to communicate with slaves: pre-drivers, HVPSS and PSYS. Add new board if needed
- 09:56 RF PLC User story #2651: Use port CP to communicate with slaves: pre-drivers, HVPSS and PSYS. Add new board if needed
- The CP port shall be use for slave communications
The CPU port shall be use for SCADA communications. - 09:55 RF PLC User story #2651 (Code: Impl): Use port CP to communicate with slaves: pre-drivers, HVPSS and PSYS. Add new board if needed
- There is space in the rack to add the CP343-1
- 10:28 RF PLC User story #2663 (New): Add stack light to PLC logic
- - Ivan to define logic: green everything light, orange filament on, red any other PS On
- Ivan to send information a... - 10:24 RF PLC User story #2662 (New): check if status of pre-driver can be added to PLC logic
- - Ivan to send technical manual and define logic
- Check if PLC can read the inputs.
- include them into the archi... - 10:20 RF PLC User story #2593 (Code: Rev): identify all signals used in the State Machine: oirigin, destination and functionality
- Agreed to review the signal of the Test-benches features. Most probably to be removed. To be confirmed by Ivan.
26.05.2025
- 12:02 RF PLC User story #2594 (Code: Impl): Frist draft of State Machine to be implemented inPLC
- 11:04 RF PLC User story #2650 (Rejected): Architecture option: add board to replace moxa communications (converter from TCP to RS485)
- PSYS will be replaced by a new version that will accept directly TCP, so no need to add a RS485 board
- 10:08 RF PLC User story #2650 (Rejected): Architecture option: add board to replace moxa communications (converter from TCP to RS485)
- 10:09 RF PLC User story #2651 (Closed): Use port CP to communicate with slaves: pre-drivers, HVPSS and PSYS. Add new board if needed
20.05.2025
- 15:51 MARTe2-components User story #2520 (Closed): NI6368 ADC improvements
19.05.2025
- 18:09 MARTe2-components User story #2520 (Code: Impl): NI6368 ADC improvements
- Linting started and is quite advanced.
- 14:37 MARTe2-components User story #2520 (New): NI6368 ADC improvements
- 17:17 MARTe2-components User story #2064 (Closed): Make NI9157Device inheritable
13.05.2025
- 13:10 RF PLC User story #2592: Define communications between PLC and EPICS avoiding the use of the microbox
- - consider safety measures when a periphery is disconnected.
- agreed network connection architecture (new network ... - 13:05 RF PLC User story #2593: identify all signals used in the State Machine: oirigin, destination and functionality
- all signals with description. Description are being updated when reviewing FSM
- 13:04 RF PLC User story #2554 (Closed): Review documentation of present control system of RF
- 13:04 RF PLC User story #2552 (Closed): Migration of present RF PLC code from step 7 classic to TIA Portal
- 13:04 RF PLC User story #2562 (Code: Rev): Deliverable first task plan
- 13:03 RF PLC User story #2561 (Closed): Review datasheets of PS of RF system and check code of managers
- 12:06 MARTe2-core User story #2618 (Code: Impl): Add bitwise support to the MathExpressionParser
- * Add bitwise operations support (and, or, xor, neg, shift left, shift right) to the MARTe2 MathExpressionParser
06.05.2025
- 17:15 RF PLC User story #2592: Define communications between PLC and EPICS avoiding the use of the microbox
- As suggested by Roberto we can use the S7plc EPICS driver described on https://epics.web.psi.ch/style/software/s7plc/...
05.05.2025
Also available in: Atom